Don’t Get Stuck In a Scary Situation – Take Care of Your Car!

Don’t Get Stuck In a Scary Situation - Take Care of Your CarMost of us associate October with Halloween and Trick or Treat, but did you know that October is also Fall Car Care Month? The Car Care Council recommends that you take care of your car with a seasonal maintenance visit so you can avoid the potentially scary situation of a breakdown leaving you stranded. 

Regular vehicle maintenance is  essential for assuring the safety and dependability of your vehicle. Fall Car Care Month is the perfect time to take care of your car with some much needed attention before the punishing winter weather sets in. 

The AAA Exchange offers this checklist as a guide to what items you should have inspected to take care of your car fall maintenance needs: 

Battery, Terminals, Cables, & Charging System – Have your technician test the battery and charging system. Confirm that the battery terminals and cable ends are free from corrosion and the connections are tight.

Drive Belts & Engine Hoses – Have the underside of accessory drive belts checked for cracks or fraying. The cooling system hoses should also be inspected for leaks, cracks, brittleness, or loose clamps. 

Brakes – If your car has been showing signs of a brake problem, have the system inspected by your technician to ensure all components are in proper working order.

Tires – Have your tires inspected and replace any tire that has less than 3/32-inches of tread. Uneven tire wear may be a sign of improper alignment or wheel balance, or even an indication of suspension problems. Have all of these things checked if your tread is wearing too fast.

Tire inflation pressure should be checked, as well. Did you know that tire pressure drops as temperatures drop? Pressure should be checked more frequently in fall and winter.

If you plan to get winter tires, now is the time.

Fluid Levels – This is another thing you can check yourself. If your coolant is low, add a 50/50 mixture of coolant and water. If you don’t need to add fresh coolant, you should test the effectiveness of the coolant in your tank. You can buy a tester or ask your technician to test it for you.

Fill the windshield washer fluid tank with a winter cleaning solution that contains antifreeze elements to prevent it from freezing.

Check the transmission, brake and power steering fluids to ensure they are at or above the minimum required levels.

Air Filter – You can check your air filter by holding it up to the light. If there is no visibility through it, it should be replaced. If you are not sure, have your technician check it when your other services are being done.

Lights & Wiper Blades – Verify that all headlights, taillights, brake lights, turn signals, emergency flashers and back-up lights are functioning properly. Replace any wiper blades that leave streaks or miss spots. If you see a lot of snow in your area, you can install winter wiper blades that wrap the blade frame in a rubber boot to reduce ice and snow buildup.

 

Auto Safety – Teen Develops Promising Solution to the Blind Spot

Auto safety is always a great topic to discuss and recently there has been much buzz about a fourteen-year-old Pennsylvania student who invented a new vehicle safety feature that earned her a $25,000 prize. 

Teen Develops Blind Spot Solution

Over the decades, automobile design and engineering have made tremendous strides in terms of safety features, including strengthening of the vehicle frame to prevent vehicle collapse in the event of a rollover. Unfortunately, this strong A-frame design leads to serious visibility problems for drivers, as the A-frame pillars create “blind spots” in the driver’s viewable area. According to NHTSA data, nearly 840,000 accidents per year are related to blind spot issues.

Fourteen-year-old Alaina Gassler of West Grove, PA seems to have hit upon a viable solution to this issue with her blind spot reduction system, which makes the A-frame pillars in a vehicle effectively disappear! Alaina’s system employees the use of a webcam, a projector, a 3D printed adapter and retro-reflective fabric. It is demonstrated in the video below:

The invention, which she completed while in eighth grade, earned Alaina a grand prize of $25,000 from the Society for Science and the Public’s Broadcom MASTERS (Math, Applied Science, Technology, and Engineering for Rising Stars) science and engineering competition.

Congratulations to this incredible young woman on her achievement!